Characteristics of Waterproofing Membrane 1. SBS modified bitumen compound
| • Tensile strength and elongation • Fatigue resistance against repeated expansion and contraction of structure • Flexibility at low temperature • Heat-resistance • Elasticity and restoring force. |
| | | 2. Good durability and shape stability | | Kukdong membranes have on excellent durability and shape stability, with non-woven polyester reinforcement. |
| | | 3.Excellent cold-resistance and heat-resistance | | Kukdong waterproofing membranes can be applied in various weather conditions from mild region to cold region. |
| | | 4. No deterioration by torch-on | | There is no physical deterioration when the membrane applied with torch since it has excellent heat-resistance. |
| | | 5. Excellent installability and watertightness | | We have greatly improved the adhesive force of self-adhesivemembrane, so that our membranes have achieved excellent install abilityand watertightness of over-lap joints. |
| | | Mixing Process of modified bitumen compound. | | | Microscopic pictures show the mixing process of bitumen and SBS rubber. After the mixing process, we can get the homogeneous compound.
black:bitumen Yellow:SBS rubber | | | | (20min. after) | (40min. after) | (80min. after) |
|
| | | Non-woven polyester reinforced Exposure, torch-on waterproofing cap membrane | RUBYCAP is advanced exposing waterproofing membrane having non-woven polyester reinforement thoroughly impregnated and coated with SBS modified bitumen in regular thickness and finished the surface withcolored granules in order to protect from ultraviolet rays and makeappearance beautiful. |
|
| | | Characteristic | | • Excellent physical properties including tensile strength, elongation and tear strength. • Excellent fatigue resistance against repeating expansion and contraction. • Excellent weather resistance and durability. • Various color. |
| | | Application | | • Exposing waterproofing on the roof. |
| | | Specification | | | Class | RUBYCAP-T | Compound | SBS | Softening point | Above 115℃ | Cold-bend temperature | Below -15℃ | Reinforcement | Non-woven polyester 180g/㎡ | Top surface | Colored granules | Bottom surface | P.E. film | Thickness | 4.0mm | Width × length | 1 × 10m | |
| | Be able to manufacture various thickness, width and length of membrane according to customers ' request. |
| | | | | | | gray | dark gray | green | dark green | | | | | red | dark red | brown | dark brown |
|
| | | Applying method : Torch-on installation |
| | | Non-woven polyester reinforced Non-exposure waterproofing membrane | RUBYPOL-S having anexcellent physical charateristics is a waterproofing membrane which hasnon-woven polyester reinforcement thoroughly impregnated and coatedwith SBS modified bitumen in regular thickness. |
|
| | | Characteristic | | • Excellent physical properties including tensile strength, elongation and tear strength. • Excellent fatigue resistance and size stability against repeating expansion and contraction. • Excellent installation efficiency in torch with good heat-resistance. |
| | | Application | | • Non-Exposure waterproofing of important building. • Waterproofing of underground structure such as subway, common duct, power plant and parking mall. • Waterproofing on the roof. • Base sheet for double-ply. • Waterproofing for various structures which have many vibrations. |
| | | Specification | | | Class | RUBYPOL- S | Compound | SBS | Softening point | Above 100℃ | Cold-bend temperature | Below than -15℃ | Reinforcement | Non-woven polyester (more than 120g/㎡) | Top surface | Fine sand | Bottom surface | Release paper or Release film | Thickness | 2.5, 3.0mm | Width × length | 1 × 10m | Installation | Self-adhesive | |
| | Be able to manufacture various thickness, width and length of membrane according to customers ' request. |
| | | P.P cloth reinforced Non-exposure, self-adhesive waterproofing membrane | UBYSHEET is waterproofing membrane having P.P. cloth reinforcement which has excellent tensile strength and tear strength coated with SBS modified bitumen in regular thickness and then finished with release paper on the adhesive surface. |
|
| | | Characteristic | | • Excellent tensile strength and tear strength. • Excellent fatigue resistance against repeating expansion and contraction. • Excellent installation efficiency on the bending parts with good flexibility. |
| | | Application | | • Waterproofing of underground structure such as subway, common duct, power plant and parking mall. • Base sheet for double-ply. |
| | | Specification | | | Class | RUBYSHEET | Compound | SBS | Softening point | Above 100℃ | Cold-bend temperature | Below than -15℃ | Reinforcement | P.P. cloth | Top surface | Fine sand or P.E. film | Bottom surface | Release paper | Thickness | 2.5, 3.0 mm | Width × length | 1 × 10m | |
| | Be able to manufacture various thickness, width and length of membrane according to customers ' request. |
| | | Non-woven polyester reinforced Non-exposure waterproofing membrane | RUBYDECK having a special non-woven polyester reinforcement and is a waterproofing membrane which has two layers of SBS modified bitumen with reinforcement to absorb outside impact and restrain from paving road's crack. |
|
| | | Characteristic | | • Absorption and distribution of vehicle load. • Increase adhesive strength between concrete surface and upper layer. • Resistant increasing from various vibration • Improving stickiness for the steel layer. • Excellent installation efficiency in torch with good heat-resistance. |
| | | Application | | • Concrete road and high-way waterproofing • Steel and concrete bridge waterproofing • Waterproofing for roof and parking lot • For Non-exposure waterproofing. |
| | | Specification | | | Class | RUBYDECK | Compound | SBS | Softening point | Above 115℃ | Cold-bend temperature | Below than -15℃ | Reinforcement | Non-woven polyester (more than 180g/㎡) | Top surface | Fine sand | Bottom surface | P.E. film | Thickness | 3.0, 4.0mm | Width × length | 1 × 10m | Installation | Torch-on | |
| | Be able to manufacture various thickness, width and length of membrane according to customers ' request. |
| | | P.P cloth reinforced Non-exposure, self-adhesive waterproofing membrane | UBYSHEET is waterproofing membrane having P.P. cloth reinforcement which has excellent tensile strength and tear strength coated with SBS modified bitumen in regular thickness and then finished with release paper on the adhesive surface. |
|
| | | Asphalt primer is the mixture of asphalt and volatile solvent whichis waterproofing and dampproofing products with purpose of improvingadhesiveness and safe waterproofing by forming thin layer film afterapplying on the concreate, cement, mortar or steel surface. |
| | | Product Standard | | | Test Item | | Standard | Test method | Viscosity @ 25 ℃ S.F.S | 25 - 125 | KSM 2270 or ASTM D41 | Distillation Vol % | Up to 225 ℃ | 35 min | Up to 360 ℃ | 65 max | Residue@360 ℃ | Penetration @ 25℃ dmm | 20 - 50 | Solubility in T.C.E Vol % | 99 min | Others requirement % | 0.02 max | |
|
| | | Usages | | Waterproofing, lower layer coating for dampproofing, lower layercoating for metal surface, timber structure waterproofing, adhesive forwaterproofing membrane. |
| | | Specification | | • After drying surface completely, remove hole and pointed part. Also, clean the surface by eliminating dirt, rust and small crumbs with brush or compressed air. • Apply primer with roller or spray after clean surface. • Drying time of primer is about 1-5 hours by temperature. If over 24hours passed after applying primer or contaminated with dirt or sand, re-coating is necessary. |
| | | Consuming quantity | | | Surface | Concrete | Rough mortar | Smooth mortar | Metal | Timber | primer quantity(ℓ/㎡) | 0.4 - 0.6 | 0.2 - 0.4 | 0.1 - 0.3 | 0.1 - 0.2 | 0.3 - 0.4 | |
|
| | | Notice | | • Primer is inflammable products and need special care when keeping or storing. • Solvent is volatile when applying primer. Need ventilation in working area. |
|